Please follow the following steps to scan an GDE enrollment bar-code:
1. Open the application and if message appear "Tap hear to scan bar-code" you should tab and a red line will appear. If the application open and are already registered to the school but with an old principal's details please go to the right hand top corner of the screen and click on the three vertical stripes (or dots) it is next to the two arrows in circle position.
2. Choose Re-enroll
3. The message will appear "Tap here to scan barcode" and tap and see the red line.
4. Now open the barcode send to you by email from our support desk by clicking on the link and please do open this bar-code picture on another device or computer because you will need the tablet to take the picture of this bar-code.
5. Once the bar-code is opened on another device (or you can print the bar-code out) then watch the red line on the tablet screen and point the back side of the tablet screen towards the bar-code. It should be as if you are taking a picture and remember the tablet screen should face you while the back of the tablet face the bar-code. I said it is as if taking a picture because you also need to make sure that the entire bar-code is in the block- red line square so that the full bar-code is captured and it will enroll you automatically. Many have problems either standing too far or too close to the bar-code so make sure the full bar-code is captured (it should be about an arm's length's distance between the tablet and opened bar-code).
Now, once it has been enrolled you will see the school and principal's details and you will need to lo-gin with the password now. Your device is now ready to start the GDE stats submissions.
Please sign in to leave a comment.